Luggage pannier rack

Worked for 2 weekends on these pannier racks with my dad. Its taken about 10 hours of welding and grinding in total  and 4 hours of priming and painting.

On first attempt we used the tube bender from Bunnings. We spent couple of hours bending the pipes to match the Ventura rack but the handles of the tool were bending before the pipes would. So i have returned it to Bunnings after an hour of use, with both handles fallen off, bolts and nuts come of too. That pipe bender is only capable of bending garden hoses i think.While it would be nice to have a pipe bender at home hydraulic or similar, we still had to go and make rack just by bending all the pipes around the knees.

On the night before the long trip ,not perfectly shaped but close enough we got the rack ready. We tried to follow the shape of the Ventura rack, but It came out bit wider near the seat and the brackets that we welded on to go under the seat into the same spot where Ventura racks were appeared to have a lot more flex then original Ventura. so we decided to add another set of brackets as there was another set of holes  we could use on both ends of the pillion grab handles. 

That gave it a lot more stability and rack was flexing a lot less. we then added side pannier frames ,rectangular loops, it was now getting more solid. Tested with the heavy rear bag and tried to shake it. It could still flex a little bit, I didnt want to have a tired metal in those places where we bent the brackets so we welded little plates to the side of the brackets to stop them from flexing. Now its very solid.

I sanded it and used a round file at place where joints were.
It was already around 8-9pm when i started applying the first layers of prime coat and being in a hurry and having to leave around lunch time next day I had little time to spare so I was applying more layers of primer every 20-30 mins as soon as it touch dry.
Then started sparying with black paint and primer started to float above the paint in multiple places. I guess it wasnt set yet.
I have applied probably 2-3 layers of paint on top and started installing the rack around midnight.

even next day when we left to horsham when i taken the bag off the rack the paint still wasnt set properly in some places as touching the bottom of the bag was leaving stain marks.

After the trip a lot of the paint got stripped at the places where bags were rubbing it and playwood that supported the bags also was like abrasive to the paint.
now i might take it of again and do it properly this time spray and dry for few days before recoating and leave to set for few days idealy in the sun


Trying the rack on the bike




Leave a Reply

Your email address will not be published. Required fields are marked *